(i)Tension Control BrakeModel TCB-7FORM NO. L-20169-D-0501AIR CHAMP PRODUCTSUser Manual
7FORM NO. L-20169-D-0501ITEM DESCRIPTION QTY1 Housing 12 Friction Disc Hub 13 Set Screw (Not Shown) 34 Bearing 15 Spacer 26 Key (Not Shown) 17 Retaini
8FORM NO. L-20169-D-0501WARRANTIESWarrantiesNexen warrants that the Products will be free from any defects in material or workmanship for a period of
(ii)In accordance with Nexen’s established policy of constant product improvement, the specifications contained in thismanual are subject to change wi
(iii)TABLE OF CONTENTSIntroduction--------------------------------------------------------------------------------------------------------------------
1FORM NO. L-20169-D-0501INTRODUCTIONRead this manual carefully, making full use of its explanations and instructions. The “Know How” of safe, continu
2FORM NO. L-20169-D-0501INSTALLATIONDo not flange mount the TCB-7. Flangemounting will result in damage to the TCB-7Housing.1. Insert the Nexen suppl
3FORM NO. L-20169-D-0501Never exceed the maximum operating speedof 4000 RPM. Before placing TCB-7 intoservice, check that the Socket Head CapScrews (
4FORM NO. L-20169-D-0501TROUBLESHOOTINGPARTS REPLACEMENTFRICTION FACINGS1. Stop the machine and shut off the air supply tothe TCB-7.2. Disconnect th
5FORM NO. L-20169-D-0501DIAPHRAGM1. Proceed with Steps 1 - 4 of PARTS REPLACE-MENT—FRICTION FACINGS.2. Remove the six Socket Head Cap Screws (Item 20)
6FORM NO. L-20169-D-0501BEARING REPLACEMENT1. Proceed with Steps 1 - 4 of PARTS REPLACE-MENT—FRICTION FACINGS.2. Loosen Set Screws (Item 3) and remove
Comments to this Manuals