1FORM NO. L-20175-J-1112Models SSE-450, SSE-600, SSE-800, and SSE-1000
10FORM NO. L-20175-J-1112 PARTS REPLACEMENTFRICTION FACINGS NOTE: Refer to Figure 6.1. Align the holes in the Friction Disc Hub (Item 1) with the M
11FORM NO. L-20175-J-11125. Remove the Socket Head Cap Screws (Item 16).6. Remove the Piston (Item 2).7. Using C-Clamps, compress the Spring Housin
12FORM NO. L-20175-J-1112 REPLACEMENT PARTS LISTThe item or balloon number for all Nexen products is used for part identification on all product parts
13FORM NO. L-20175-J-1112 FACING AND REPAIR KITS TABLE 10 Brake Guards TABLE 11 ACCESSORIES* Use this repair kit for SSE-1000's with serial
14FORM NO. L-20175-J-1112Nexen Group, Inc.560 Oak Grove ParkwayVadnais Heights, MN 55127800.843.7445Fax: 651.286.1099www.nexengroup.comISO 9001 Certi
2FORM NO. L-20175-J-1112Copyright 2012 Nexen Group, Inc.Nexen Group, Inc.560 Oak Grove ParkwayVadnais Heights, Minnesota 55127ISO 9001 CertifiedThis do
3FORM NO. L-20175-J-1112Table of ContentsGeneral Specifications ---------------------------------------------------------------------------------------
4FORM NO. L-20175-J-1112GENERAL SPECIFICATIONSGENERAL SAFETY PRECAUTIONSSpecifications:Torque Up to 418 Nm (3700 in-lbs)Actuation Pressure 1 - 5.5 bar
5FORM NO. L-20175-J-1112 INSTALLATION TABLE 11. Before mounting, ensure Cylinder (Item 10) has adequate clearance to move freely (See Figure 1 and T
6FORM NO. L-20175-J-1112NOTENote: Nexen pneumatically actuated devices require clean, pressure regulated air for maximum performance and life. All se
7FORM NO. L-20175-J-1112 AIR CONNECTIONS NOTE: Refer to Figure 4.NOTE: The Restrictor is provided to prevent Shoulder Bolt (Item 6) fatigue from imp
8FORM NO. L-20175-J-1112 OPERATIONThe SSE Brake will remain engaged until sufficient air pressure is applied to release it. Depending upon the length
9FORM NO. L-20175-J-1112 TROUBLESHOOTING FIGURE 5FrictionFacingPistonPlateCompressionSpringO-Ring SealsAir InletPistonBearingFrictionDisc HubCylinde
Comments to this Manuals