(i)FORM NO. L-20323-D-0300FMBES-CCModels 625, 875, 1125,and 1375
6FORM NO. L-20323-D-030010. Reinstall the Retaining Ring (Item 15) (See Figure 9).11. Pressing on the inner race of the two new Ball Bearings(Item 9),
FORM NO. L-20323-D-0300723. Using 'C' clamps, press the Friction Disc (Item 4) ontothe Piston (Item 5) (See Figure 10).24. Apply a drop of L
8FORM NO. L-20323-D-0300FMBES-CC, 625ITEM DESCRIPTION QTY1 Shaft 12 Rotor 1 31,2Friction Facing 24 Friction Disc 15 Piston 16 Female Pilot 17 Housin
FORM NO. L-20323-D-03009FMBES-CC, 1125ITEM DESCRIPTION QTY1 Shaft 12 Rotor 1 31,2Friction Facing 24 Friction Disc 15 Piston 16 Female Pilot 17 Housi
10FORM NO. L-20323-D-0300In accordance with Nexen’s established policy of constant product improvement, the specifications contained in this manual ar
FORM NO. L-20323-D-030011WARRANTYNexen Group, Inc. (Nexen) warrants its product(s) [the Product(s)] will be free from defects in materials andworkmans
(ii)In accordance with Nexen’s established policy of constant product improvement, the specifications contained in thismanual are subject to change wi
(iii)Read this manual carefully before installation and operation.Follow Nexen's instructions and integrate this unit into your system with care.
(iv)Table of ContentsInstallation --------------------------------------------------------------------------------------------------------------------
FORM NO. L-20323-D-03001INSTALLATIONNOTEThe following sections are arranged by model. Verify that you are in the correct section for your model.FMBES
2FORM NO. L-20323-D-0300LUBRICATIONNOTEPneumatically actuated devices require clean, pressure regulated, and lubricated air for maximum performanceand
FORM NO. L-20323-D-03003TROUBLESHOOTINGFIGURE 3BallBearingFemalePilotFrictionFacingRotorDiscPlateSetScrewJamNutO-ringSealWaveSpringBallBearingShaftCo
4FORM NO. L-20323-D-0300PARTS REPLACEMENTNOTEThe following sections are arranged by model. Verify that you are in the correct section for your model.
FORM NO. L-20323-D-03005BALL BEARINGS, COMPRESSION SPRINGS, WAVED SPRING, AND O-RING SEALS FMBES-CC1. Remove the six Socket Head Cap Screws (Item 11)(
Comments to this Manuals