1FORM NO. L-21026-E-1209B275 Clutch Sheave, Pilot and Coupling Mount
10FORM NO. L-21026-E-1209TROUBLESHOOTINGPilot Mount DiscFriction DiscAssemblyPistonAirFilterAirChamberRetaining RingBearingRetaining RingRetaining Rin
11FORM NO. L-21026-E-1209REPLACEMENT PARTS LIST* Denotes Repair Kit Item Retaining Ring(Item 2)Bearing(Item 3)Wave Spring(Item 5)Pilot MountDisc(Item
12FORM NO. L-21026-E-1209Nexen Group, Inc.560 Oak Grove ParkwayVadnais Heights, MN 55127800.843.7445Fax: 651.286.1099www.nexengroup.comISO 9001 Certi
2FORM NO. L-21026-E-1209Copyright 2009 Nexen Group, Inc.Nexen Group, Inc.560 Oak Grove ParkwayVadnais Heights, Minnesota 55127ISO 9001 CertifiedThis do
3FORM NO. L-21026-E-1209Table of ContentsGeneral Specifications ---------------------------------------------------------------------------------------
4FORM NO. L-21026-E-1209GENERAL SPECIFICATIONSGENERAL SAFETY PRECAUTIONSSpecifications:Torque Up to 11.3 Nm (100 in-lbs)Actuation Pressure 1 - 5.5 bar
5FORM NO. L-21026-E-1209INSTALLATIONSHEAVE AND PILOT MOUNTINGNOTE: Refer to Figure 1.1. Insert the Key (Item 21) into the keyway of the mounting sha
6FORM NO. L-21026-E-1209AIR CONNECTIONSConnect the Air Hose Assembly (Item 19) to the 1/8 NPT female Air Inlet Fitting (Item 18) in the Air Chamber (I
7FORM NO. L-21026-E-1209 OPERATIONWARNINGNever exceed maximum operating speeds listed for your product. (See Table 1). CAUTI ONThe temperature
8FORM NO. L-21026-E-1209PARTS REPLACEMENTNOTE: Refer to Figures 5, 6, 7 and 81. Remove the Retaining Ring (Item 2) from the pilot end of the clutch.2
9FORM NO. L-21026-E-120913. Remove the Retaining Ring (Item 28) from the Piston (Item 13).14. Fully support the Piston (Item 13) and press the Ball
Comments to this Manuals