Nexen DFC-1650 964161 User Manual download pdf (Page 4)

FORM NO. L-20272-E-1199

BEARINGS

Lubricate the Bearings after every forty hours of operation

by applying two to three strokes of grease with a hand grease

gun (See Figure 6).

NOTE

Nexen recommends the use of Chevron SRI #2 or

equivalent.

FRICTION FACING INSPECTION

Visually inspect the Friction Facings after every forty hours

of operation. Replace the friction facings when the remaining

material is 5/16" thick. Use a scale to measure the thickness

on the NECO-2200.

The NECO-1650 has steps in the friction facing which indicate

5/16" thickness. When the steps are no longer visible, the

facings need to be replaced (See Figure 7).

FIGURE 6

FIGURE 7

Steps in

Friction Facings

Grease Fitting

(Item 25)

1 2 3 4 5 6 7 8 9 10

No comments

Nexen DFC-1650 964161 User Manual Page 4