(i)FORM NO. L-20365-A-0699METRIC FACE MOUNTED ENCLOSED CLUTCH BRAKEFMCBE MODEL 70-14WITH/WITHOUT INTEGRAL VALVEINSTALLATION AND MAINTENANCE GUIDE“Air
(4)FORM NO. L-20365-A-0699DIN Connector; 9mm CentersAIR AND ELECTRICAL CONNECTIONS (Integral Valve Style)FIGURE 6FIGURE 7NOTE: Refer to Table 1 an
(5)FORM NO. L-20365-A-0699FIGURE 8HousingPlugFriction FacingSplined DiscAssemblyCylinderAirChamberO-ringSealsAir toBrakeAir toClutchPistonBearingKeyS
(6)FORM NO. L-20365-A-0699FMCBE AssemblyNOTE: Refer to Figures 9, 10 11, 12 and 131. Remove the four Socket Head Cap Screws (Item 13)and slide the Hou
(7)FORM NO. L-20365-A-0699FIGURE 1110121514632141516FIGURE 1222. Lubricate and install the new O-ring Seals (Items 14and 15) onto the Piston (Item 1
(8)FORM NO. L-20365-A-0699TROUBLESHOOTINGSYMPTOM PROBABLE CAUSE SOLUTIONFailure to engage.Air not getting to the FMCBE due to acontrol valve malfuncti
(9)FORM NO. L-20365-A-0699141512105264271236162419202363214151813REPLACEMENT PARTS LISTTo order replacement parts, indicate model description, item nu
(10)FORM NO. L-20365-A-0699REPLACEMENT PARTS LIST continuedFMCBE -Integral Valve Style (see figure 15)FIGURE 15ITEM DESCRIPTION QTY1 Housing 1 21Be
(11)FORM NO. L-20365-A-0699WARRANTYNexen Group, Inc. (Nexen) warrants its product(s) [the Product(s)] will be free from defects in materials and workm
(12)FORM NO. L-20365-A-0699
(ii)In accordance with Nexen’s established policy of constant product improvement, the specifications contained in thismanual are subject to change wi
(iii)Read this manual carefully before installation and operation.Follow Nexen's instructions and integrate this unit into your system with care.
(v)Table of ContentsInstallation ---------------------------------------------------------------------------------------------------------------------
(vi)-NOTES-
(1)FORM NO. L-20365-A-0699FIGURE 1Item 26NOTE: Refer to Figure 11. Remove the Socket Head Cap Screws (Item 13) and theHousing (Item 1).2. Insert the
(2)FORM NO. L-20365-A-06994-WAY CONTROL VALVENOTE: Refer to Figure 31. If the brake is to be set when the solenoid is de-energized, connect Port 2 to
(3)FORM NO. L-20365-A-0699NOTICEThe settings below are for Nexen supplied lubricators.If you are not using a Nexen lubricator, then calibration must r
Comments to this Manuals