FORM NO. L-21082-E-01101FCB-450, LCB-600, MCB-800Clutch-BrakesAIR CHAMP PRODUCTS
10FORM NO. L-21082-E-0110PARTS REPLACEMENT (continued...)NOTE: Refer to Figure 7.14. Remove the four Socket Head Cap Screws (Item 19); then, slide
FORM NO. L-21082-E-011011PARTS REPLACEMENT (continued...)NOTE: Refer to Figure 9.29. Remove the Retaining Ring (Item 13) from the Air Chamber
12FORM NO. L-21082-E-0110 REPLACEMENT PARTS LISTThe Item or “Balloon” Number for all Nexen Products is used for part identification on all Product Par
FORM NO. L-21082-E-011013 REPLACEMENT PARTS LIST (continued) ITEM DESCRIPTION QTY 1 Hub 1 2 Piston 1 3 Air Chamber Housing 1 4 Cylinder
14FORM NO. L-21082-E-0110Nexen Group, Inc.560 Oak Grove ParkwayVadnais Heights, MN 55127800.843.7445Fax: 651.286.1099www.nexengroup.comISO 9001 Certi
2FORM NO. L-21082-E-0110Copyright 2010 Nexen Group, Inc.Nexen Group, Inc.560 Oak Grove ParkwayVadnais Heights, Minnesota 55127ISO 9001 CertifiedThis do
FORM NO. L-21082-E-01103Table of ContentsGeneral Specifications ---------------------------------------------------------------------------------------
4FORM NO. L-21082-E-0110GENERAL SPECIFICATIONSGENERAL SAFETY PRECAUTIONSCAUTI ONUse lifting aids and proper lifting techniques when installing,
FORM NO. L-21082-E-01105INSTALLATIONSHEAVE MOUNT CLUTCH/BRAKENOTE: Refer to Figure 1.1. Insert the Key (Item 22) into the machine shaft. Align the Ke
6FORM NO. L-21082-E-0110NOTENexen pneumatically actuated devices require clean, pressure regulated air for maximum performance and life. All seals in
FORM NO. L-21082-E-011073/2 (3 Way)4/2 (4 Way)5/2 (4 Way)5/2 (5 Way)AIR CONNECTIONSNOTEFor quick response, Nexen recommends a quick exhaust valve
8FORM NO. L-21082-E-0110TROUBLESHOOTINGMELBORP ESUACELBABORP NOITULOSegagneoteruliaFaoteudekarB/hctulCehtotgnittegtonriAnoitcnuflamevlavlortnocecalper
FORM NO. L-21082-E-01109 PARTS REPLACEMENTNOTE: Refer to Figures 5 and 6 for steps 1-13.1. Remove the Retaining Ring (Item 11) and press the Air Cham
Comments to this Manuals